Search Results

In 1958 the Coordinating Research Council conducted an extensive series of vapor lock road tests at a centralized location to study the effect of test variables on the hot fuel handling characteristics of passenger cars. Two years later, another test program was carried out at a common location to determine the hot fuel handling characteristics of a selected group of 1960 cars, employing the vapor lock survey technique developed in the 1958 program. The results obtained from the two programs indicate that this technique provides a satisfactory basis for defining the more severe vapor handling characteristics of automobiles in a relatively short time.

The problem associated with laboratory evaluation of muffler acoustical characteristics are complicated both by the acoustical considerations involved in obtaining an adequate noise source and by the ambiguities involved in defining what constitutes quality in a muffler built for general application. In order to quantitatively define the characteristics of quality mufflers, an extensive series of field tests were conducted on a variety of sizes and types of mufflers in conjunction with four engine configurations. Work then turned to the development of a wide band siren noise source and acoustical test system which would simulate the high impedance character of an engine exhaust noise source, and in addition generate the necessary intensity and spectral characteristics required to obtain test data over the range of noise conditions encountered in the field.

Under a new program of quality control in the field of powder metallurgy automotive parts called quality assurance, the supplier is made a closer partner with the buyer to get a more dependable part that consistently meets all requirements and specifications. The quality assurance program consists of review of potential suppliers, contract negotiations, initial quality assurance surveys, and routine quality assurance surveys.

THE Free-Piston Engine Program described in this paper was concerned with determining thermodynamic relationships of small, high-speed engines. The purpose was to establish proper engine geometry and mechanical design which could then be applied to developing larger automotive engines. The author outlines the problems encountered during the Program's beginnings: starting system, powerplant assembly, cooling system, and lubrication. The results indicated that the free-piston engine would be particularly applicable to the farm tractor. The author thinks that such a powerplant may equal or better the diesel engine in economy.

APPLICATIONS of nuclear energy in automotive manufacture have been made principally in the field of radioactivity. These are grouped under the following categories: radiography, nondestructive testing, gaging and control, tracer techniques, and static neutralizers. Radioactivity techniques are being used in foundry operations to check stock and metal levels in cupolas and distribution of element additives. In steel operations, these techniques are being used to check assimilation of ore-concentrate fines and thickness of rolled sheet steel. Other applications include measurement of pipe and wall thickness in pressure lines and engines, and inspection of castings and welds for internal faults. Radioactive techniques for improving processes, quality, and materials have potentially universal application. Greater industrial access to reactors will permit broader study and speed the development of new applications of radio-activity in industry.

STYLING the Continental Mark II with a very low silhouette without sacrificing leg room, seating comfort, and driver visibility was accomplished by using a specially designed frame and a 3-joint driveline. These two features are the basic engineering innovations which make possible the Continental's distinctive classic styling. As a result of this structural analysis, Ford has produced an automobile that, according to the author, has technical advancements that are of value to the consumer.

AS a basis for the analyses of this symposium, a hypothetical car has been used to evaluate the engine power distribution in performance. Effects of fuel,-engine accessories, and certain car accessories are evaluated. The role of the transmission in making engine power useful at normal car speeds is also discussed. Variables encountered in wind and rolling resistance determinations are reevaluated by improved test techniques. Net horsepower of the car in terms of acceleration, passing ability and grade capability are also summarized.

TWENTY-FIVE-YEAR statistics, detailed in this paper, show declining accident and fatality rates despite radical increase in vehicle registrations and annual vehicle miles. The author shows how the passenger-car industry has built safety into vehicles to the point where-as an example-only 14% of accidents on the Pennsylvania Turnpike over its 13-year history were attributed to vehicle failures. Paralleling these efforts and the increasing emphasis on safer highways, better traffic management and driver education, are extensive studies aimed at bypassing the human factor and increasing human safety in automotive vehicles. Among those described here are crash investigations, laboratory tests of safety devices, and establishment through various other means of design criteria for human impact tolerance.

ONE plastic model is worth 40 lb of blueprints and 40 hr of the explaining that goes along with the prints, according to engineers who have worked with the new plastic “toys” which can serve as perfectly scaled miniatures for virtually every phase of automobile design and manufacture. The extensive benefits occasioned by this revolution in methods may be summarized thus: 1. Shortens design development time by providing a third-dimension evolvement of structure and form. 2. Used in advance discussions for compromising engineering and manufacturing problems, showing construction so clearly that troublesome problems are foreseen; thus enabling clear-cut, reliable decisions with a minimized chance of encountering major revisions. 3. Show in one minute what could not be found on prints for hours, saving time over any other methods, while generating valuable counterproposals reducing costs, operations, man-hours, and so forth. 4.

THE study of engine life, carried out by investigating engine wear in typical service, and by then striving to find the most effective ways of controlling it, forms the basis of this paper on contaminants in lubricants. The investigation involved a study of engine wear in 20,000 miles of operation typical of the average driver. The average driver was selected by using test cars from an employee transportation car pool. At the conclusion of the tests it was found that the use of the full-flow oil filter proved to be the best method for restricting engine wear caused by contaminants that get inside the engine. It was also shown that after successfully eliminating large, solid particles, further restriction of engine wear would depend upon the ability of the oil to lubricate, and upon the engine design to provide the oil supply in a manner suitable for lubrication of each part of the engine.

PROPER protection of metal parts operating as bearing surfaces, or in contact under relatively heavy loads, during the break-in period often means the difference between successful operation and failure. Various surface coatings have been investigated to discover which ones will give this protection. The authors discuss here three types of surface treatment for cast-iron and steel that do give superior wear and scuff resistance.